Should you change to tubeless tyres? (video)

Once the choice was simple: clincher v tubular. But now tubeless are on the brink of taking off, and in some situations they might be perfect

If you ve bought a new bike in the past year or so, chances are the wheelset is tubeless-ready . The technology has been around for several years and the number of manufacturers now making them is reaching a tipping point. Last month Zipp, builder of the most sought-after carbon wheels on the market, announced its first tubeless-ready wheelset.

>>> Buyer s guide to road bike tyres1

In the past, road tyres came in two options: clincher, with an open tyre and separate inner tube; or tubular, with a rubber tread stuck to an enclosed canvas casing, and a tube inside, that you glue to the wheel rim. Clinchers or high pressures (HPs) have always been the first choice for general cycling due to ease of use when you puncture, and cost. Tubulars remain the tyre of choice for track racing, time trialling and much of the pro peloton.

>>> Will carbon clinchers kill off tubular tyres?2

For some time now mountain bikers have used tubeless tyres a system very similar to a car tyre where an open rubber outer tyre sits firmly in a wheel s rim. No inner tube is needed as the rims and valve are sealed. Air sits in the cavity between the wheel rim and the inside of the tyre. Off-road there are many benefits as tyres can be run at lower pressure giving better grip with no risk of pinch punctures. The benefits might not be so obvious on the road where running tyres at such low pressure doesn t offer many benefits.

Video Can a tubeless tyre survive a nail?

Fewer flats, thicker tread

Tubeless tyre systems do, however, suffer from fewer flats than clinchers as they are run with sealant inside that will instantly dry around a hole and seal it. Tubeless tyres can also run a slightly thicker tread without compromising feel, which with only one layer between the wheel and the tarmac is said to be better than clinchers.

>>> Solid tyres go mainstream as Wiggle stocks up3

If the system does fail when you re out on a ride, an inner tube can always be fitted to get you home. So, with so much going for them, why aren t tubeless tyres more popular? Cycle tech legend Keith Bontrager is a fan, but understands their limitations: I came into road tubeless from many years of mountain bike tubeless experience, so there wasn t really much new that had to be done. The real difference is that the pressure in road bikes tyres is much higher than with mountain bikes, so the sealant behaves a little differently.

>>> Are wider tyres really faster?4

The problem first of all is that the pros don t use tubeless. They race on tubular for really good reasons they stay on the rim, they re light and they roll well.

Tubeless tyres are heavy. They re
probably a little quicker rolling than tubulars in the lightest possible case, but those would also be fragile.

Another problem with tubeless is that they just take a little more casing to contain air than a tyre with an inner tube, Bontrager said. But we fit tubeless-ready wheels to Trek bikes because we anticipated that for sportive riders and for recreational riders the tubeless set-up with sealant would be a popular thing. It ll take a while, though. The approach to mounting tyres and the maintenance of a tubeless wheel is a little different than with standard inner tubes, and for some people it might be a hassle.

>>> The best road bike upgrades5

Finally, as always with new bike innovation, as different manufacturers come out with their own take on a certain technology, it leads to some confusion. The international standard is fuzzy, it s not guaranteed, Bontrager says. Having a bunch of proprietary standards that aren t compatible would be a nightmare. So there is an attempt, and it is a legitimate attempt, to try to make the interface between the tyre and the rim fairly universal.

Should You Change To Tubeless Tyres? (video)

Bontrager Race: tubeless ready wheelset

Our take

Tubeless tyres are nice to ride, and if used with sealant can be quick to fix in the event of a puncture. They won t take over from clinchers so long as they remain such hard work in the event of total failure. Because the seating of the tyre bead has to be so secure (to keep the air in) tolerances are tighter, making them extremely hard to get on and off a rim. On a warm summer s day they would defeat most riders grip strength; in the winter they re as good as impossible to change.

For: Keith Bontrager, bike technology legend

Should You Change To Tubeless Tyres? (video)

I m a fan, but then I only train on my road bike, I don t actually race on my road bike, and tubeless tyres are not yet really racing tyres. A tubeless tyre with sealant is much less prone to punctures so, compared to having to change a flat tyre in the rain with buses whizzing past, it s a much better option. And our Bontrager Tubeless Ready wheels can be used either with or without inner tubes, so you don t even have to make the call straight away.

Against: Benjamin Blaurock, Continental Tyres, road tyres product manager

Should You Change To Tubeless Tyres? (video)

Continental tyres: no tubeless here. Photo: Daniel Gould

We don t make tubeless tyres at Continental right now. The benefit of them in mountain biking is you can use very low pressures for better grip without getting snakebite punctures. But for the traditional road market we don t think those are as important factors. The construction of road tubeless tyres is a far bigger challenge.

You need a heavier system because of the higher pressures, yet weight is a very important factor for road cyclists.

References

  1. ^ >>> Buyer s guide to road bike tyres (www.cyclingweekly.co.uk)
  2. ^ >>> Will carbon clinchers kill off tubular tyres? (www.cyclingweekly.co.uk)
  3. ^ >>> Solid tyres go mainstream as Wiggle stocks up (www.cyclingweekly.co.uk)
  4. ^ >>> Are wider tyres really faster? (www.cyclingweekly.co.uk)
  5. ^ >>> The best road bike upgrades (www.cyclingweekly.co.uk)

Leave a Reply

Your email address will not be published. Required fields are marked *

*